DMR PD3 Series (Pre-Ordering Sale) Expected delivery for beginning of October 2014Pocket-size Design
Micro USB Charging
Dual Modes (Analogue & Digital)
Superior Audio
• Pocket-size design and easy to carry
• Four programmable buttons
• Micro USB port for easy charging
• Radio more compact through creative antenna design
• Digital mode operates >12 hours 5-5-90 duty cycle
• Dual mode: smooth migration analogue to digital
• Voice communication: private, group and all call
• Work and user groups can be configured with unique CTCSS/CDCSS to prevent unwanted conversations on the same frequency
• Radios can be enabled to continuously scan each analogue and digital channel
• Supports messaging with up to 64 characters
• Supports a one touch feature for pre-programmed text messages and voice calls
• High quality speaker for clear audio
• Cost-effective digital experience
Hytera PD362 DMR Two Way Radio
DMR PD3 Series - Pocket-size Design - Micro USB Charging - Dual Modes (Analogue & Digital) - Superior Audio
Features
Product Similarity Declaration
Radio Model Numbers: PD362 are electrically identical. The different point is: The Models name are different because the target markets are different.
Frequency Range UHF:
- 430-470mhz
- UHF High Power: 3.0W
- UHF Low power: 1.5W
FM Modulation:
- 11K0F3E @ 12.5KHz
- 16K0F3E @ 25KHz
4FSK Digital Modulation: Motorola MotoTRBO Compatible
- 12.5KHz Data Only: 7K60FXD
- 12.5KHz Data & Voice: 7K60FXW
FCC approved
See the Hytera PD3 Series on YouTube
| General Specs | ||
| Frequency Range | UHF: 430-470MHz | |
| Channel Capacity | 256 | |
| Channel Spacing | 25/12.5KHz | |
| Zone Capacity | 3 | |
| Operating Voltage | 3.7 | |
| Battery (5-5-90 Duty Cycle, High Tx Power) | 2000mAh (Li-Ion) | |
| Battery Life (5/5/90 ) | Digital: approximately 12 hours; Analogue: approximately 10 hours | |
| Frequency Stability | ±0.5ppm | |
| Antenna Impedance | 50Ω | |
| Dimensions | 106 x 54 x 23mm | |
| Weight | 160g | |
Transmitter |
||
| RF Power Output | UHF High power: 3W; UHF Low power: 1.5W | |
| FM Modulation | 11K0F3E @ 12.5KHz, 16K0F3E @ 25KHz | |
| 4FSK Digital Modulation | 12.5kHz Data Only: 7K60FXD 12.5kHz Data & Voice: 7K60FXW | |
| Conducted/Radiated Emission | -36dBm1GHz | |
| Modulation Limiting | ±2.5KHz @ 12.5KHz, ±5.0KHz @ 25KHz | |
| FM Noise | 40dB @ 12.5KHz, 45dB @ 25KHz | |
| Adjacent Channel Power | 60dB @ 12.5KHz 70dB @ 25KHz | |
| Audio Response | +1 ~ -3dB | |
| Audio Distortion | ≤3% | |
| Digital Vocoder Type | AMBE++ or SELP | |
| Digital Protocol | ETSI-TS102 361-1，2&3 | |
Receiver |
||
| Sensitivity | Analog | 0.22μV (12dB SINAD) 0.22μV (Typical) (12dB SINAD) 0.4μV (20dB SINAD) |
| Digital | 0.22μV /BER5% | |
Adjacent Selectivity
TIA-603
ETSI
|
60dB @ 12.5KHz / 70dB @ 25KHz
60dB @ 12.5KHz / 70dB @ 25KHz
|
|
Spurious Response Rejection
TIA-603
ETSI
|
70dB @ 12.5/25KHz
70dB @ 12.5/25KHz
|
|
Inter-modulation
TIA-603
ETSI
|
70dB @ 12.5/25KHz
65dB @ 12.5/25KHz
|
|
| Hum & Noise | 40dB @ 12.5KHz, 45dB @ 25KHz | |
| Rated Audio Power Output | 0.4W | |
| Rated Audio Distortion | <5% | |
| Audio Response | +1 ~ -3dB | |
| Conducted Spurious Emission | < -57dBm | |
Environmental Specifications |
||
| Operating Temperature | -30℃ ~ +60℃ | |
| Storage Temperature | -40℃ ~ +85℃ | |
| ESD | IEC 61000-4-2 (level 4) ±8kV (contact) ±15kV (air) | |
| Dust & Water Intrusion | IP54 Standard | |
| Humidity | Per MIL-STD-810 C/D/E/F/G Standard | |
| Shock & Vibration | Per MIL-STD-810 C/D/E/F/G Standard | |
PD36X, X=2, 5,6 or 8, model number varies geographically. For details, please contact our regional sales representatives.
All specifications are subject to change without notice due to continuous development.
No comments:
Post a Comment